Compare

Laser engraving software for trophy and awards shops

A season's awards night is forty plates, the same layout and forty different names. The software should do the repetitive part.

Reviewed by the Vextrify team, tested in our own laser workshops · Updated · How we test

Try Vextrify free
01

Names, years and placings from a spreadsheet

Lay out the plate once. Put {csv:Name}, {csv:Year} or any column name into the text, load the spreadsheet, and each run takes the next line. Fill a sheet with an array of copies and every copy gets its own line, so one job engraves the whole list. Empty lines can be skipped, and the header row is optional. A {serial} field numbers certificates or limited editions.

  • {csv:Column} for names and placings
  • Array of copies, one line each
  • {serial} and {date} for numbering
02

Placing the design on every piece

Plates and blanks never sit exactly where the jig says. With a calibrated camera, workpiece detection finds every piece on the bed and places the design on each one, or fits it into each piece. Pieces that touch are reported so you can move them. You check the overlay on screen before anything fires.

  • Calibrated camera overlay
  • One click finds the pieces
  • Design placed on each piece
How workpiece detection works
03

Team photos and memorial pieces

Photos on anodized aluminum, stainless steel, glass, acrylic and slate each need different preparation. Photo Studio has material profiles, ten dithering methods and a preview of the dot pattern, and saves the result as a recipe so the next order looks the same. Batch applies one recipe to a whole folder of photos.

  • Material profiles
  • Recipes for repeat orders
  • Batch for a folder of photos
See Photo Studio
04

Cups, plates and the lasers that engrave them

The desktop app drives GRBL diode lasers, Ruida, TopWisdom and Trocen CO2 controllers and JCZ and SEA-LASER/BSL fiber galvo boards. Cups and tumblers use the rotary setup with diameter and axis; on galvo heads, cylinder correction bends the design for the diameter and split marking handles designs wider than the field. Each laser gets its own tab, so the CO2 can cut acrylic while the fiber marks plates.

  • Diode, CO2 and fiber in one app
  • Rotary setup for cups
  • Galvo cylinder correction
See supported lasers
05

Which plan

Preparing files and exporting them for another laser program needs Studio. Driving the lasers from Vextrify needs Studio Pro; the desktop app has a 24-hour trial. A free account shows the preparation tools in the browser.

Create a free account

Lasers Vextrify drives

The desktop app for macOS, Windows and Linux connects to these controllers directly and runs the job live.

Diode lasers

  • GRBL — USB or network
  • xTool D1 · D1 Pro · S1
  • Sculpfun · Ortur · Atomstack · Twotrees

G-code firmware

  • Marlin
  • Smoothieware
  • Snapmaker 2.0 · Artisan

CO2 lasers

  • Ruida — USB or network
  • TopWisdom
  • Trocen / AWC
  • K40 with stock M2 Nano board

Fiber galvo lasers

  • SEA-LASER / BSL — e.g. Leapion LM-30S
  • JCZ / EZCAD2 (BJJCZ LMC)
  • EZCad3

Common questions

Can I engrave a list of names automatically?

Yes. Put {csv:Name} in the text and load the spreadsheet; each plate gets the next line. An array of copies engraves a whole sheet of different names in one job.

Does it work with my fiber laser for metal plates?

Vextrify drives JCZ/EZCAD2, EZCad3 and SEA-LASER/BSL galvo boards, and GRBL diode and Ruida CO2 lasers. Check your controller on the supported-lasers page.

Can it engrave cups and tumblers?

Yes, with a rotary on a supported controller: set diameter and axis in the rotary setup. On galvo lasers, cylinder correction adjusts the design for the cup's diameter.

Can software read names from photos of old trophies?

Vextrify does not read text from photos. Type or paste the names into a spreadsheet and use {csv:Name}; the layout then fills itself.