Compare

Monport laser software

Looking for software to run and prepare for your Monport laser? Vextrify controls CO2 lasers and prepares your artwork in the same app — on macOS, Windows and Linux.

Reviewed by the Vextrify team, tested in our own laser workshops · Updated · How we test

Try Vextrify free
01

The short answer

Yes — Vextrify works with Monport. Monport CO2 lasers with a Ruida controller — most of the larger models — connect to Vextrify for live control. Entry-level K40-style models with a stock M2 Nano board connect too, with the power set on the machine's own dial (the stock board has no software power control). Beyond control, Vextrify is a full suite: it prepares photos, removes backgrounds, vectorizes logos and lays out jobs, then runs the machine — and it manages several machines, each in its own tab, on macOS, Windows and Linux. You can start free in the browser and add the desktop app for live control.

  • Connects to Monport CO2 lasers
  • Framing, dry-run and live job control
  • Built-in photo, background, vector and relief prep
Try Vextrify free
02

Connecting your Monport

Monport CO2 lasers with a Ruida controller — most of the larger models — connect to Vextrify for live control. Entry-level K40-style models with a stock M2 Nano board connect too, with the power set on the machine's own dial (the stock board has no software power control). Once connected, Vextrify gives you framing to position the job, a dry-run to check travel, and live control to start, pause, resume or stop — with the device's safety limits respected. If you would rather finish in another tool, Vextrify exports clean files for LightBurn and EZCAD, and .rd files for Ruida controllers.

  • USB connection with profile detection
  • Framing, dry-run and live job control
  • Clean exports for LightBurn / EZCAD / Ruida (.rd)
03

Prepare the artwork in the same app

The biggest difference from a plain controller is everything that happens before the burn. With your Monport, Vextrify lets you prepare photos for engraving, remove busy backgrounds, extract cut contours, vectorize logos to SVG and lay everything out millimetre-accurately on the machine bed — all feeding straight into the job, with no exporting and re-importing between programs.

  • Photo engraving prep with material-aware tones
  • Background removal, contour-to-SVG and vectorize
  • Millimetre-accurate layout on the machine bed
04

More than a controller

Vextrify runs natively on macOS, Windows and Linux and in the browser, so your Monport workflow is not tied to one operating system. A calibrated camera places designs exactly on the material, a built-in material test grid helps you find your own speed and power, and you can manage several machines, each in its own tab from one license — useful as soon as you add a second machine.

  • Native macOS, Windows and Linux, plus browser
  • Camera placement on the material
  • Several machines, each in its own tab, one license
05

Get started with your Monport

Create a free account and load a photo in the browser first to see it prepared, then install the desktop app to connect your Monport for live control. No second computer or operating-system switch required.

  • Start free in the browser
  • Install the desktop app for live control
  • Connect over USB and run
Run your Monport with Vextrify

Lasers Vextrify drives

The desktop app for macOS, Windows and Linux connects to these controllers directly and runs the job live.

Diode lasers

  • GRBL — USB or network
  • xTool D1 · D1 Pro · S1
  • Sculpfun · Ortur · Atomstack · Twotrees

G-code firmware

  • Marlin
  • Smoothieware
  • Snapmaker 2.0 · Artisan

CO2 lasers

  • Ruida — USB or network
  • TopWisdom
  • Trocen / AWC
  • K40 with stock M2 Nano board

Fiber galvo lasers

  • SEA-LASER / BSL — e.g. Leapion LM-30S
  • JCZ / EZCAD2 (BJJCZ LMC)
  • EZCad3

Common questions

Does Vextrify work with Monport lasers?

Yes. Monport CO2 lasers with a Ruida controller — most of the larger models — connect to Vextrify for live control. Entry-level K40-style models with a stock M2 Nano board connect too, with the power set on the machine's own dial (the stock board has no software power control). Vextrify also prepares your artwork and manages several machines, each in its own tab.

Can I control my Monport over USB?

Yes. Vextrify connects over USB with framing, dry-run and live job control, within the device's safety limits.

Does it run on a Mac?

Yes. Vextrify runs natively on macOS, Windows and Linux and in the browser, so your Monport is not tied to a single operating system.

Is there free software for Monport lasers?

For Ruida-based Monport models, RDWorks is free on Windows. Vextrify shows your photo prepared for free in the browser; exporting needs a Studio plan and laser control a Studio Pro plan.

Can I still use LightBurn with my files?

Yes. Vextrify opens LightBurn projects (.lbrn2), material libraries (.clb) and device files (.lbdev), and exports clean files for LightBurn and EZCAD, and .rd files for Ruida controllers, whenever you prefer to finish a job elsewhere.